Bettina Gomez-Latus ᱨᱮᱱᱟᱜ Solitaire Twisted अंगुठि

Bettina Gomez-Latus ᱨᱮᱱᱟᱜ Solitaire Twisted अंगुठि ᱫᱚ ᱜᱟᱦᱱᱟ ᱰᱤᱡᱟᱭᱤᱱ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2020 A' Design Award ᱠᱟᱥᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾

ᱠᱟᱥᱟᱜᱟᱦᱱᱟ· 2020

Solitaire Twisted अंगुठि

Bettina Gomez-Latus ᱞᱮᱠᱟᱛᱮ

ᱜᱟᱦᱟᱠ: 1Karat - Atelier für Schmuck & Design - Bettina Gomez-Latus

ᱜᱟᱦᱱᱟ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱠᱟᱥᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ

21,094

ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ

#103001 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪ

ᱥᱟᱭᱤᱴ ᱧᱮᱞ ᱢᱮ A' Design Award ᱨᱮ ᱧᱮᱞ ᱢᱮ ᱯᱨᱮᱥ ᱨᱤᱞᱤᱡ ᱯᱩᱨᱥᱠᱟᱨ ᱵᱮᱡ

ᱨᱚᱝ

ᱰᱤᱡᱟᱭᱤᱱ

Solitaire Twisted अंगुठि ᱵᱟᱵᱚᱛ ᱛᱮ

नोवा अंगुठि प्लैटिनम ९५२ सॊते बानाव आकान आर मित कैराट हिराक लागाव आकान। एञ बोहोक रुप आर बेसि पहेरना सुविधा सॊते चिन्हाव आकान। घुरावाक सेटिङ हिराक उपर आडे खुल्लावाक आकाद आर साथेसाथे हल्कापन एम आकाद। हुड़िङ सेटिङ होनो लेकिन पासे पारदर्शिता कारोन हिरा डाहार चमक आक आकाद। उपर सॊते नेल आकादे नोवा हुड़िङ राज नुदुक बाङा।

ᱢᱟᱱᱟᱱ

A' Design Award ᱠᱟᱥᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ

Solitaire Twisted अंगुठि ᱫᱚ A' Design Award ᱠᱟᱥᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱱᱟᱣᱟ ᱵᱷᱟᱵᱱᱟ ᱛᱮ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Solitaire Twisted अंगुठि ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾

ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ

ᱯᱨᱮᱥ ᱠᱤᱴ

ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾

ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ: This ring is characterized by clear lines, a flowing form and a high level of wearing comfort. The twisted setting stretches the diamond upwards and at the same time gives it a lightness that is created by the transparency of the twisted ring band. Seen from above, the little secret of this lightness cannot be seen, because despite the compact setting, the diamond has a strong luminosity due to the lateral transparency.
ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ: Ring size: Ø 54, Platinum 952, Diamond Ø 6.5 mm TW vsi 1.0 ct.
ᱴᱮᱜ ᱠᱚ: ring, brilliant, platinum, diamond, jewelry design, jewelry, gemstones, handmade
ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ: The ring was designed on a computer using CAD, plotted in wax and cast in platinum 952. The casting was finished at the workbench and the diamond was set.
ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ: The most difficult part of designing this object was getting the ring ready for serial production in a wide variety of alloys, stone and ring sizes without changing the proportions of the entire ring during production.
ᱜᱚᱵᱮᱥᱚᱱᱟ: In order to create the ring, it was necessary to examine how much the ring band could be tapered and still maintain the tension of the twisted setting while holding the gemstone. This was necessary because the setting was subject to considerable pressure and the spiral was not allowed to compress.
ᱯᱨᱮᱨᱚᱱᱟ: The inspiration for this solitaire ring was to construct everything from one wire. It should be light and yet compact. An engagement ring should be created that is clear in its form and soft in its appearance. The ring should also be very comfortable and wearable at any occasion. It should not be the usual narrow and conical closed setting often chosen for engagement rings, it should move to a new type of setting that comes from the ring band itself.
ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ: The project started in May 2018 and ended in July 2019. The ring is produced in Steinbach (Taunus), Germany.
ᱠᱟᱹᱢᱤ ᱦᱚᱨ: During the development of the ring, the concentration was on the setting. The diamond should be firmly set, nothing should disturb the simplicity of the setting and the ring band and yet there should be tension in the statement of the ring. The twist of the upper ring band which holds the setting of the diamond made this possible. The setting with the diamond seems to float
ᱪᱤᱛᱟᱹᱨ ᱥᱟᱹᱦᱟ: All Fotos by Atelier Bettina Gomez-Latus