SoomeenHahm Design ᱨᱮᱱᱟᱜ Infinite Series ᱥᱟᱭ ᱫᱚ ᱜᱟᱦᱱᱟ ᱰᱤᱡᱟᱭᱤᱱ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2018 A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾
ᱨᱩᱯᱟᱜᱟᱦᱱᱟ· 2018
Infinite Series ᱥᱟᱭ
SoomeenHahm Design ᱞᱮᱠᱟᱛᱮ
ᱜᱟᱦᱟᱠ: SoomeenHahm Design
ᱜᱟᱦᱱᱟ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ
ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ
#60435 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪᱰᱤᱡᱟᱭᱤᱱ
Infinite Series ᱥᱟᱭ ᱵᱟᱵᱚᱛ ᱛᱮ
ᱟᱹᱱᱛᱤᱨᱤᱱ ᱥᱤᱨᱤᱡ ᱢᱮᱱᱛᱮ ᱢᱤᱫ ᱠᱚᱴᱷᱟ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱞᱚᱜᱚᱸ ᱨᱮᱭᱟᱜ ᱫᱷᱟᱨᱟ ᱠᱷᱚᱸᱡᱟᱣ ᱠᱷᱚᱱ ᱛᱮᱭᱟᱨ ᱦᱩᱭ ᱟᱠᱟᱱᱟ ᱾ ᱨᱮᱭᱟᱜ ᱠᱚ ᱫᱚ ᱡᱟᱠᱟᱛ ᱥᱟᱭ ᱠᱷᱚᱱ ᱠᱚᱲᱟ ᱛᱮ ᱟᱨ ᱵᱷᱤᱛᱨᱤ ᱠᱷᱚᱱ ᱵᱟᱦᱨᱮ ᱛᱮ, ᱵᱟᱸᱜᱚ ᱚᱠᱛᱚ ᱟᱨ ᱚᱠᱚᱭ-ᱚᱠᱚᱭ ᱦᱩᱭ ᱛᱮ ᱢᱤᱫ ᱢᱤᱫ ᱥᱟᱭ ᱨᱮᱭᱟᱜ ᱨᱮ ᱵᱚᱦᱚᱜ ᱠᱟᱱᱟ ᱾ ᱱᱚᱶᱟ ᱰᱤᱡᱟᱭᱤᱱ ᱫᱚ ᱢᱤᱫ ᱴᱷᱮᱱ ᱫᱮᱠᱷᱟᱣ ᱠᱚ ᱮᱢ ᱦᱩᱭ ᱛᱟᱦᱮᱸᱱᱟ ᱡᱟᱦᱟᱸ ᱠᱷᱚᱱ ᱛᱤᱱ (৩) ᱰᱟᱭᱢᱮᱱᱥᱚᱱ ᱨᱮ ᱢᱤᱫ ᱡᱟᱠᱟᱛ ᱞᱩᱯ ᱚᱴ ᱠᱚ ᱛᱮᱭᱟᱨ ᱠᱟᱱᱟ ᱾ ᱱᱚᱣᱟ ᱞᱮᱠᱟᱱ ᱞᱩᱯ ᱫᱚ ᱵᱟᱨ (২) ᱰᱟᱭᱢᱮᱱᱥᱚᱱ ᱨᱮ ᱫᱮᱠᱷᱟᱣ ᱟᱠᱟ ᱵᱟᱝ ᱦᱩᱭ ᱫᱟᱲᱮᱭᱟᱜᱼᱟ, ᱟᱨ ᱮᱴᱟᱜ ᱫᱚ ᱠᱚᱴᱷᱟ ᱨᱮᱭᱟᱜ ᱠᱚ ᱤᱫᱤ ᱛᱤᱱ (৩) ᱰᱟᱭᱢᱮᱱᱥᱚᱱ ᱨᱮᱭᱟᱜ ᱚᱨ ᱠᱚ ᱠᱷᱚᱱ ᱟᱨᱦᱚᱸ ᱛᱮ ᱵᱩᱡᱷᱟᱹᱣ ᱞᱟᱹᱠᱛᱤ ᱛᱟᱦᱮᱸᱱᱟ ᱾ ᱱᱟᱶᱟ ᱨᱚᱲ (ᱯᱮᱴᱟᱨᱱ) ᱟᱨ ᱨᱩᱯ ᱠᱚ ᱫᱚ ᱠᱚᱢᱯᱩᱴᱮᱥᱟᱱᱚᱞ ᱰᱟᱭᱱᱟᱢᱤᱠ ᱰᱤᱡᱟᱭᱤᱱ ᱥᱮᱴᱮᱢ ᱛᱮ ᱛᱮᱭᱟᱨ ᱠᱟᱱᱟ ᱾ ᱠᱚᱛᱷᱟ ᱥᱟᱭ ᱫᱚ ᱢᱚᱢ ᱯᱨᱤᱸᱴᱤᱸ (wax printing) ᱛᱮ ᱛᱮᱭᱟᱨ ᱟᱨ ᱢᱮᱴ ᱠᱟᱞᱟ ᱥᱴᱤᱞ ᱨᱮ ᱠᱟᱥᱴ ᱠᱟᱱᱟ ᱾
ᱢᱟᱱᱟᱱ
A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ
Infinite Series ᱥᱟᱭ ᱫᱚ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱥᱩᱱᱫᱚᱨ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Infinite Series ᱥᱟᱭ ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾
ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ
ᱯᱨᱮᱥ ᱠᱤᱴ
ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾
- ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ
- The ring is consist of several continuous stream or seam lines flowing over the entire ring from front to back, from inside and outside, folded and overlaid. The design provides the viewer for a visual experience following the continuous loop 3 dimensionally. This continuous loop cannot be experienced in 2D spaces but only through observing as 3D object.
- ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ
- Ring size : 52
Fluid I : 24 x 80 x 30 (mm)
Fluid II : 21 x 60 x 21 (mm)
Twist I : 20 x 45 x 28 (mm)
Twist II : 23 x 38 x 26 (mm) - ᱴᱮᱜ ᱠᱚ
- Ring, Accessory, Fashion, Metal, Computational Design, Jewellery
- ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ
- Wax printing and casting in metal (Matte Black Steel)
- ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ
- One of the biggest challenges in the creation of the ring series was to generate continuous loop within 3D software Technics. A number of prototypes were created to find the final design which shows clear stream or seam lines.
- ᱯᱨᱮᱨᱚᱱᱟ
- The design of the series was inspired by idea of continuity. The patterns and shapes were generated by computational dynamic design system to create 3 Dimension continuous loop.
- ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ
- The project was developed in 2016 and 2017 in London.
- ᱯᱮᱴᱮᱱᱴ ᱠᱚ
- Copyright © SoomeenHahm Design Ltd. All rights reserved.
- ᱪᱤᱛᱟᱹᱨ ᱥᱟᱹᱦᱟ
- Photographer Hanjun Kim, 2017
Photographer Marita Madio, 2017
ᱥᱯᱚᱱᱥᱚᱨᱰ
Designers.org ᱠᱷᱚᱱ ᱯᱟᱨᱚᱢ ᱛᱟᱞᱟᱥ
ᱟᱞᱮᱭᱟᱜ ᱵᱤᱜᱽᱭᱟᱯᱚᱱ ᱥᱟᱹᱜᱟᱹᱭ ᱠᱚ ᱠᱷᱚᱱ ᱯᱨᱚᱰᱟᱠᱴ, ᱥᱮᱵᱟ ᱟᱨ ᱢᱚᱠᱟ ᱩᱫᱩᱜ ᱢᱮ᱾
ᱟᱨᱦᱚᱸ ᱠᱷᱚᱡ ᱢᱮ
ᱥᱟᱹᱜᱟᱹᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ
ᱢᱤᱫ ᱞᱮᱠᱟ ᱠᱮᱴᱮᱜᱚᱨᱤ ᱠᱷᱚᱱ ᱟᱨᱦᱚᱸ ᱯᱩᱨᱥᱠᱟᱨ ᱧᱟᱢᱟᱠᱟᱱ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱧᱮᱞ ᱢᱮ, ᱡᱚᱜᱭᱟᱛᱟ ᱧᱮᱞ ᱛᱮ ᱵᱟᱪᱷᱟᱣ ᱟᱠᱟᱱᱟ᱾
