Delo Decker Zložljiv stol avtorja Cameron Smith je izjemno cenjeni dobitnik prestižne nagrade 2022 Železna nagrada A' Design Award v tekmovalni kategoriji Oblikovanje pohištva.
ŽeleznaPohištvo· 2022
Decker Zložljiv stol
avtor/ica: Cameron Smith
Naročnik: Furniture Smith
Dobitnik nagrade Železna nagrada A' Design Award v kategoriji Pohištvo
Potrjeni dobitnik nagrade
Preverite status nagrade za #137461Dizajn
O dizajnu Decker Zložljiv stol
Decker je zložljiv stol, zasnovan za uporabo na jahtah. Stol se odpre v nizek počivalnik in se zloži v kompaktno obliko, debelo le 100 milimetrov. Ogrodje je izdelano iz nerjavečega jekla s trapezoidnimi cevmi in litimi obročki, povezanimi z medeninastim okovjem na vrtiščih. Tikove letve so pritrjene na jermenske trakove namesto na ogrodje, tako da se sedež in naslon prilagajata uporabniku. Geometrija čez sredinsko točko drži trakove napete, ko je stol odprt. Zamik v okvirju sedeža tvori ročaj za prenašanje, magneti pa držijo zložene noge na mestu.
Priznanje
O nagradi Železna nagrada A' Design Award
Decker Zložljiv stol je prejemnik Železne nagrade A' Design Award, prestižnega priznanja, ki se podeljuje dobrim oblikovanjem, ki izpolnjujejo profesionalne in industrijske zahteve, pričakovane od dobro zasnovanih stvaritev. Prejemniki Železne nagrade kažejo veliko spretnost, visoko specializacijo, strokovno razumevanje in ustvarjalne zmožnosti svojih ustvarjalcev. Od Decker Zložljiv stol se pričakuje, da bo visoko cenjena, občudovana in ljubljena stvaritev, ki je praktična in inovativna. To oblikovanje, nagrajeno z Železno nagrado A' Design Award, vključuje najboljše prakse panoge in ima kompetentne tehnične lastnosti, povezane s strokovnim znanjem in talentom. Zaradi svoje temeljitosti si Decker Zložljiv stol zasluži spoštovanje in je zasnovan tako, da zagotavlja izboljšave kakovosti življenja, ki pomagajo narediti svet boljši kraj.
V ozadju dizajna
Komplet za medije
Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.
- Edinstvene lastnosti
- Inspired by the need for quality compact furniture on yachts, the Decker folding yacht chair easily folds from a lounge chair to a compact form factor. Teak wood slats are secured to webbing straps rather than the stainless steel frame to provide flex and added comfort in the seat. A jog in the seat frame creates a handle when folded and allows the needed geometry for an over center design that keeps the webbing in tension and the backrest open while in use.
The teak seat and back slats are secured to webbing straps that run from the front of the seat to the top of the back. When unfolded, the unique over-center design provides tension on the straps holding the teak seat and back. The straps provide a secure seat that flexes and gives with the user. - Dimenzije in embalaža
- Open
660 mm wide x 730 mm deep x 673 mm tall
26” wide x 28.75” deep x 26.5” tall
Folded
660 mm wide x 570 mm deep x 100 mm thick
26” wide x 22.5” deep x 4” tall - Oznake
- folding chair, yacht chair
- Proizvodna tehnologija
- Materials common in yachts such as stainless steel, brass and teak are used in the Decker chair. The stainless steel frame is fabricated with trapezoidal tubing and cast lugs. The tubing and lugs are welded and finished to create a seamless frame. Brass hardware is used for pivot joints and fastening hardware. An optional pad with outdoor fabric withstands the elements encountered by yachts.
- Oblikovalski izziv
- The chair has a simple design, yet there were several challenges in the design. Creating tension in the webbing and teak slats through the over center design of the backrest required multiple prototypes and webbing materials to be tested. The simplicity of the pivots required design iterations to create surfaces that interact with each other while the chair was open and closed. These simple details become the highlight of the chair.
- Raziskave
- A lower lounge chair was selected to aid the ability to fold and nest shorter legs. An ergonomic model was created that allowed for adjustment of the angle and height of the seat and back.. Adjusting the angles and length of the components allowed for the geometry to be tested by various users for maximum comfort.
- Inspiracija
- There is not a lot of room on yachts, but they maintain a high desire to have flexible furniture that can be easily stowed when not in use. Plastic chairs or bulky furniture aren't at home on expensive yachts. The Decker folding yacht chair can be used on deck and easily stowed when needed.
- Trajanje projekta
- Design completed January 2022 with prototype units completed March 2022 in Seattle, Washington USA.
- Potek delovanja
- The folding chair is simple to use. To close the chair simply flip the backrest down onto the seat. The teak slats relax when folded as the webbing is no longer under tension. With the backrest folded, the chair can be picked up by the handle on the back of the seat frame. The front legs are then folded followed by the back legs. The legs are held in place by magnets embedded inside the tubing.
The same process is used to unfold the chair. First the legs are unfolded and the chair placed on the legs. The backrest is opened and the teak slats are tightened with the webbing is tightened. - Člani ekipe
- Cameron Smith
Adam Smith - Zasluge za slike
- photo - Cameron Smith
Sponzorirano
Raziščite onkraj Designers.org
Odkrijte izdelke, storitve in priložnosti naših oglaševalskih partnerjev.
Odkrijte več
Sorodni dizajni
Raziščite več nagrajenih dizajnov iz iste kategorije, izbranih po kakovosti.
