Delo The Monomorph Stol avtorja Wouter Van Riet Paap je izjemno cenjeni dobitnik prestižne nagrade 2025 Železna nagrada A' Design Award v tekmovalni kategoriji Oblikovanje pohištva.
ŽeleznaPohištvo· 2025
The Monomorph Stol
avtor/ica: Wouter Van Riet Paap
Naročnik: De Ontwerpdivisie
Dobitnik nagrade Železna nagrada A' Design Award v kategoriji Pohištvo
Potrjeni dobitnik nagrade
Preverite status nagrade za #163541Dizajn
O dizajnu The Monomorph Stol
Monomorph je stol, ki je sestavljen iz 39 identičnih lesenih elementov. Uporaba zgolj ene oblike za izdelavo stola ustvari izjemno trpežen, modularen izdelek. Vsi ti trikotno oblikovani elementi izvirajo iz enega lista vezane plošče. 39 elementov je povezanih s jeklnimi palicami, ki oblikujejo naslon za hrbet, sedež in noge. Stol je mogoče prevažati kot ploščat paket in ga je enostavno sestaviti. Vezana plošča je pobarvana v vnaprej izbranih barvah ali pa se lahko uporablja neobdelana v surovi različici.
Priznanje
O nagradi Železna nagrada A' Design Award
The Monomorph Stol je prejemnik Železne nagrade A' Design Award, prestižnega priznanja, ki se podeljuje dobrim oblikovanjem, ki izpolnjujejo profesionalne in industrijske zahteve, pričakovane od dobro zasnovanih stvaritev. Prejemniki Železne nagrade kažejo veliko spretnost, visoko specializacijo, strokovno razumevanje in ustvarjalne zmožnosti svojih ustvarjalcev. Od The Monomorph Stol se pričakuje, da bo visoko cenjena, občudovana in ljubljena stvaritev, ki je praktična in inovativna. To oblikovanje, nagrajeno z Železno nagrado A' Design Award, vključuje najboljše prakse panoge in ima kompetentne tehnične lastnosti, povezane s strokovnim znanjem in talentom. Zaradi svoje temeljitosti si The Monomorph Stol zasluži spoštovanje in je zasnovan tako, da zagotavlja izboljšave kakovosti življenja, ki pomagajo narediti svet boljši kraj.
V ozadju dizajna
Komplet za medije
Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.
- Edinstvene lastnosti
- The Monomorph is a chair that is constructed with 39 completely identical plywood elements. These elements are connected by steel rods. The plywood is painted in pre-selected colors but can also be used untreated in the RAW edition. The Monomorph is a relaxing fauteuil, intriguing from all angles.
- Dimenzije in embalaža
- The chair has a total depth of 810mm, a total width of 650mm and a total height of 850mm. Materials used are painted plywood, stainless steel tubes with rifling inside and cap screw on the outside.
- Oznake
- chair, fauteuil, plywood,steel, comfortable, modular
- Proizvodna tehnologija
- The 38 elements are CNC cut after various scale models were made. There has been substantial testing of various elements resulting in different chairs with different levels of comfort. eventually this single shape turned out to be the perfect single shape to create a chair with. There are several variants with 16 identical elements instead of 39, where the seat and backrest are formed with paper cord, used trucktarp or vegan leather.
- Oblikovalski izziv
- The hardest part was to actually find the single shape with which to realize an actual chair that is both beautiful and comfortable. After the shape was found the challange was to make the chair stable. For this several models were build and eventually the real life prototype. First with 16 identical elements with vegan leather used for seat and backrest. Later even more pure, using only that one wooden shape.
- Raziskave
- As an architect I am always thinking about design and how to make it buildable. In construction the standardisation of elements, or even complete houses, has become more and more important. To keep costs acceptable, to minimize failure and maximize sustainability. But standardisation also limits the architects freedom to actually make a design. That is why I try to design these standardised elements myself in order to make the design leading and the standard elements following. The Monomorph is based on this principle of design lead standardisation. It is a chair constructed with 39 identical elements, which is a wooden triangle with rounded corners. A chair is formed by connecting these 39 elements with steel rods. The same element can be seat, backrest or leg. By adding more elements the chair can even be a sofa.
- Inspiracija
- In nature, an organism existing out of one shape is called a monomorph. The Monomorph chair is the result of my research to find this ideal single shape to create a chair with: One form to define the result. It makes building the chair efficient, creating less waste.
- Trajanje projekta
- The chair was designed in Januari 2024 in Utrecht, The Netherlands after several models were made. The first real size prototype was build in March 2024 after which extensive testing at the designers house took place. All in Utrecht, The Netherlands.
- Potek delovanja
- The chair can be assembled by everyone who can handle a allen wrench.
- Patenti
- Copyrights belong to Wouter van Riet Paap, 2024
Sponzorirano
Raziščite onkraj Designers.org
Odkrijte izdelke, storitve in priložnosti naših oglaševalskih partnerjev.
Odkrijte več
Sorodni dizajni
Raziščite več nagrajenih dizajnov iz iste kategorije, izbranih po kakovosti.
