VR Mentor Simulator Ìtọ́nà fún Eko Ehín láti ọwọ́ Wei Sun jẹ́ aṣẹ́gun olókìkí púpọ̀ ti 2024 Àmì-ẹ̀yẹ Idẹ A' Design Award nínú Ẹ̀ka Ìdíje Àpẹẹrẹ Ẹ̀kọ́, Ohun-èlò Ìkọ́ni àti Àkóónú Ìdánilẹ́kọ̀ọ́.
IdẹẸ̀kọ́· 2024
VR Mentor Simulator Ìtọ́nà fún Eko Ehín
látọ̀wọ́ Wei Sun
Oníbàárà: Xi'an Jiaotong University
Aṣẹ́gun Àmì-ẹ̀yẹ Idẹ A' Design Award nínú Ẹ̀ka Ẹ̀kọ́
Aṣẹ́gun Àmì Ẹ̀yẹ Tí a Jẹ́rìísí
Jẹ́rìísí Ipò Àmì Ẹ̀yẹ fún #152438Àpẹrẹ Náà
Nípa VR Mentor Simulator Ìtọ́nà fún Eko Ehín
VR Mentor jẹ́ ẹ̀rọ ìkọ́nilétí àti ìtọ́nà fún eko ehín tí a gbé kalẹ̀ lórí òtítọ́-àdàkọ (virtual reality). Ẹ̀rọ yìí ń so àwòrán, ohùn sítéríófóníìkì àti èsì agbára (force feedback) pọ̀ láti dá ìrírí iṣẹ́-ẹ̀rọ tí ó jinlẹ̀ àti amúnisúnwọ̀n sílẹ̀. Ọ̀nà ìkọ́nilétí méjì wà, èyí tí a fi ọwọ́ ń ṣe (hands on) àti èyí tí a ń pín papọ̀ nípa fífarakàn (shared haptic), pẹ̀lú ipò ìtọ́nà kan tí ó ń darí àwọn akẹ́kọ̀ọ́ tẹ̀lé àwọn ipa ọ̀nà akọṣẹ́mọṣẹ́ tí a ti gbasilẹ̀, tí ó ń mú ìfàsẹ́yìn àti ìdíwọ́ jáde. Ohun èlò náà ní ìwọ̀n 400 sí 400 sí 1400 mílíméètà, a sì ṣe é ní gíga tí ó bá àpéjọ ẹ̀dá ènìyàn mu (ergonomic). Software náà ni a dá sílẹ̀ pẹ̀lú Unity3D. VR Mentor ń dín iye àìní fún àwọn àwòṣe ẹ̀yà ara (anatomical specimens) kù, ó sì ń dín iye owó ìtọ́nà kù.
Ìdánimọ̀ Náà
Nípa Àmì-ẹ̀yẹ Idẹ A' Design Award
VR Mentor Simulator Ìtọ́nà fún Eko Ehín jẹ́ olùborí Àmì-ẹ̀yẹ Idẹ A' Design Award, ìdánimọ̀ olókìkí gan-an tí a fún àwọn àwòṣe tó tayọ tí wọ́n yàtọ̀ nípasẹ̀ ìṣẹ̀dá, àrékérekè àti ọgbọ́n inú. Àwọn olùborí Idẹ jẹ́ àwọn ohun èlò tó ní ìjáfáfá gan-an tí wọ́n sì ní ìṣẹ̀dá tó yani lẹ́nu tí wọ́n ń ṣe ẹ̀rí ìrírí gbígbòòrò, ìrònú àti ọgbọ́n àwọn olùṣàwòṣe wọn. A retí pé VR Mentor Simulator Ìtọ́nà fún Eko Ehín yóò jẹ́ ohun tí a kà sí gidigidi, tí a gbóríyìn fún tí a sì nífẹ̀ẹ́, tó jẹ́ ti ọ̀jáfáfá lọ́nà tó ṣe pàtàkì tó sì ní ìmúṣẹ̀dá tuntun. Àwòṣe tó borí Àmì-ẹ̀yẹ Idẹ A' Design Award yìí ń kó àwọn ọ̀nà tó dára jùlọ nínú iṣẹ́ ọnà, sáyẹ́ǹsì, àwòṣe àti ìmọ̀-ẹ̀rọ jọ, ó sì tayọ nítorí àfiyèsí rẹ̀ sí àwọn àlàyé kékeré. VR Mentor Simulator Ìtọ́nà fún Eko Ehín ń tẹ́ àwọn ohun tí a nílò lọ́rùn lọ́nà àgbàyanu, ó ń fọwọ́ kan àwọn ìfẹ́ inú, ó ń gbà ọkàn ó sì ń fa ìfẹ́ láti mọ̀ mọ́ra.
Lẹ́yìn Àpẹrẹ Náà
Àkójọ Ìròyìn
Àwọn ẹ̀tọ́, àwọn ọmọ ẹgbẹ́ àti àlàyé ìmọ̀ ẹ̀rọ tí olùṣàpẹrẹ pèsè.
- Àwọn Ohun Àkànṣe
- This product is a dental teaching and training system based on Virtual Reality. Through the multimodal combination of VR vision, stereophonic audition and force feedback, two innovative teaching modes, namely "Hands on" and "Shared haptic", along with a training mode, have been designed to provide students with immersive stereoscopic operation experience and sufficient practical opportunities.
- Ìwọ̀n àti Àpò
- Hardware: 400 mm x 400 mm x 1400 mm. The height of the device is positioned ergonomically. Software: UWP application.
- Àwọn Àkọlé
- Virtual Reality, Dentistry, Haptics, Teaching and training system, learning efficiency, Practical operation ability
- Ìmọ̀-ẹ̀rọ Ìṣelọ́pọ̀
- The system is mainly developed through Unity3D. The shell of the device can be made by ABS injection molding, which can not only meet the standards of medical devices, but also meet a certain strength and save the cost. The internal transmission and drive mechanism can use FRP and other materials with certain rigidity and fatigue resistance, which can ensure the stability and service life of the entire system.
- Ìpèníjà Àpèsè
- The most challenging part is to explore and design a novel and effective teaching model that goes beyond mere visual and basic haptic effects in VR. This model should significantly improve students' learning efficiency and practical skills, enhancing their fine motor skills and hand-eye coordination.
- Ìwádìí
- Currently, traditional training suffers from shortage of specimen resources, high cost and low efficiency. This product is a dental teaching and training system based on Virtual Reality. Through the multimodal combination of VR vision, stereophonic audition and force feedback, two innovative teaching modes, namely "Hands on" and "Shared haptic," along with a training mode, have been designed to provide students with immersive stereoscopic operation experience and sufficient practical opportunities.
- Ìmísí
- In traditional dental education models, there are problems such as a shortage of anatomical specimens, high costs, and low efficiency, which lead to inadequate clinical training for students. The development of VR technology provides a promising solution for strengthening dental education by offering more realistic, efficient, and immersive virtual teaching and training experiences.
- Àkókò Iṣẹ́ Àkànṣe
- The project started at Xi'an Jiaotong University in May 2022 and ended at Xi'an Jiaotong University in May 2023
- Ìlànà Ìṣiṣẹ́
- By recording the operation information of the expert, In the teaching mode, it can generate a standardized visualized path track on where the adsorption force can be generated. And the students are guided to move along the operation track in a way similar to the teaching by holding their hands. And the operation track can also produce resistance, which allows students to experience the magnitude of the force feedback.
- Àwọn Ìwé-ẹ̀rí Ohun-Ìmọ̀
- Copyrights belong to Wei Sun, 2023.
- Àwọn Ọmọ Ẹgbẹ́
- Wei Sun
Yao Luo
Shiwen Zhang
Zeyv Mo
Supervisor: Xiaoling Li - Ìfọwọ́sí Àwòrán
- Wei Sun
Oníṣọwọ́
Ṣàwárí Ju Designers.org Lọ
Ṣàwárí àwọn ọjà, iṣẹ́ àti àǹfààní láti ọ̀dọ̀ àwọn alábàáṣe ìpolówó wa.
Díẹ̀ Síi Láti Ṣàwárí
Àwọn Àpẹrẹ Tó Jọra
Ṣàwárí àwọn àpẹrẹ mìíràn tó gba àmì ẹ̀yẹ nínú ẹ̀ka kan náà, tí a yàn nípasẹ̀ ìyege.
