Aida Sekkei Precut Factaraidh le Nobuaki Miyashita

Tha Aida Sekkei Precut Factaraidh le Nobuaki Miyashita na bhuannaiche air leth urramach anns an fharpais chliùitich 2024 Duais Òir A' Design Award ann an Roinn Farpais Dealbhadh Ailtireachd, Togalaichean agus Structaran.

ÒrAiltireachd· 2024

Aida Sekkei Precut Factaraidh

le Nobuaki Miyashita

Neach-ceannach: Aida Sekkei Co., Ltd.

Buannaiche Duais Òir A' Design Award ann an Roinn Ailtireachd

150,107

Buannaiche Duais Dearbhaichte

Dearbhaich Inbhe na Duaise airson #160159

Tadhail air an Làrach Seall aig A' Design Award Brath Naidheachd Suaicheantas Duaise

Dathan

An Dealbhadh

Mu dheidhinn Aida Sekkei Precut Factaraidh

Tha plana factaraidh ùr Aida Sekkei a' cuimseachadh air ro-ghearradh fiodha. Tha a bhun-bheachd gu lèir mu bhith a' cruthachadh ailtireachd a tha a' riochdachadh sreath obrachadh an fhiodha. Tha e a' gabhail a-steach slighe-coiseachd shnàmhach le glainne mun cuairt timcheall air 100 meatair a dh'fhaid am broinn na factaraidh, air a dealbhadh airson luchd-tadhail a bhith a' coimhead gu dlùth air a' phròiseas ro-ghearraidh gu lèir. Tha an togalach oifis a' nochdadh àiteachan mòra le tarraingean air an dèanamh de stuthan oir-ite, a thathar a' cleachdadh gu cumanta mar fho-stuthan ann an taighean fiodha. Tha an dealbhadh a' co-fhilleadh a h-uile eileamaid gus factaraidh taisbeanaidh a chruthachadh, a' cur cuideam air faicsinneachd agus tlachd ealaineach anns gach cuid.

An Aithneachadh

Mu dheidhinn Duais Òir A' Design Award

Tha Aida Sekkei Precut Factaraidh air Duais Òir A' Design Award a bhuannachadh, aithneachadh anabarrach urramach a bheirear do dhealbhaidhean den chiad ìre, mìorbhaileach agus sònraichte. Tha buannaichean Òir nan cruthachaidhean anabarrach ùr-ghnàthach, làn lèirsinn agus drùidhteach a nochdas gèinidh, gliocas agus comas an luchd-dealbhaidh. Thathar an dùil gum bi Aida Sekkei Precut Factaraidh na innleachd a gheibh moladh mòr, a stèidhicheas gluasadan agus mòr-chuimhneachain a bheir luach nach fhacas riamh roimhe. Tha an dealbhadh seo a bhuannaich Duais Òir A' Design Award na phròiseact sònraichte, urramach a bhrosnaicheas crìochan ealain, saidheans, dealbhaidh agus teicneolais gu mòr. Bidh Aida Sekkei Precut Factaraidh a' cruthachadh faireachdainnean làidir miann, a' dùsgadh dealas, a' brosnachadh cruthachalachd agus a' glacadh sinn.

Air Cùl an Dealbhaidh

Pasgan Naidheachd

Creideasan, buill sgioba agus fiosrachadh teicnigeach a chuir an dealbhaiche ri chèile.

Feartan Sònraichte: This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
Tomhasan & Pacadh: Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2

Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden

Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2
Tagaichean: architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
Teicneòlas Cinneasachaidh: As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
Dùbhlan Dealbhaidh: When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
Rannsachadh: Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
Brosnachadh: Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
Faid a' Phròiseict: This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
Sruth Obrachaidh: This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
Peutantan: None
Creideasan Dhealbhan: Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020