Muundo Aspen Kichwa cha Tripodi na Colorado Tripod Company ni mshindi mashuhuri wa tuzo ya kifahari ya 2021 Tuzo ya Fedha ya A' Design Award katika Kategoria ya Mashindano ya Usanifu wa Kamera na Vifaa vya Upigaji Picha.
FedhaVifaa vya Upigaji Picha· 2021
Aspen Kichwa cha Tripodi
Mteja: Colorado Tripod Company
Mshindi wa Tuzo ya Fedha ya A' Design Award katika Kategoria ya Vifaa vya Upigaji Picha
Mshindi wa Tuzo Aliyethibitishwa
Thibitisha Hali ya Tuzo kwa #108315Muundo
Kuhusu Aspen Kichwa cha Tripodi
Aspen ni kichwa cha tripodi kilichobuniwa kurahisisha upangaji wa picha. Fremu iliyo wazi huruhusu kamera iliyoambatanishwa kuzunguka zaidi ya digrii 90 pande zote mbili, ikitoa mabadiliko ya haraka kati ya mwelekeo wa mandhari na wima bila mabano makubwa ya umbo la L. Mpira una kiini kisicho na kitu chenye matundu yanayopunguza uzito huku ukidumisha uimara. Kibano cha kuweza kurekebishwa hushikilia aina mbalimbali za sahani za kamera, kidhibiti cha msuguano huweka ubinamu, na kifungo cha kuzungusha huruhusu mzunguko kamili kwa ajili ya picha za panorama. Aspen imetengenezwa kutokana na alumini iliyofanyiwa anodi ngumu.
Utambuzi
Kuhusu Tuzo ya Fedha ya A' Design Award
Aspen Kichwa cha Tripodi ni mshindi wa Tuzo ya Fedha ya A' Design Award, utambuzi wenye heshima kubwa ya ajabu unaotolewa kwa miundo ya hali ya juu kabisa, ya kupendeza na ya kuvutia. Washindi wa Fedha ni kazi zinazong'aa mno na bunifu kupita kiasi zinazoonyesha utaalamu bora, kipaji na busara ya wabunifu wao. Aspen Kichwa cha Tripodi inatarajiwa kuwa kazi nzuri ya kuigwa ambayo ni ya kitaalamu kwa kiasi kikubwa na yenye ubunifu wa kina. Muundo huu ulioshinda Tuzo ya Fedha ya A' Design Award ni uvumbuzi unaojulikana sana na kupendwa, unaonufaisha na kupanua mipaka ya sanaa, sayansi, usanifu na teknolojia. Aspen Kichwa cha Tripodi ni kazi inayotamaniwa mno inayochochea hamu, huleta hisia chanya na huzua mshangao na mastaajabu.
Nyuma ya Muundo
Vifaa vya Habari
Mikopo, wanachama wa timu na maelezo ya kiufundi yaliyotolewa na mbuni.
- Sifa za Kipekee
- The Aspen tripod head provides photographers with a large range of motion to simplify photograph composition. An open frame design allows an attached camera to rotate well beyond 90 degrees in both directions for quick adjustments in both landscape or portrait orientations. The ball features a hollow core with holes to reduce weight while maintaining strength and the adjustable lever clamp offers a quick and secure attachment to a wide range of camera plates.
- Vipimo na Ufungashaji
- Width: 134 mm x Depth: 55 mm x Height: 95 mm
Weight: 440 g
Ball Diameter: 48 mm
Load Capacity: 13.6 kg - Lebo
- tripod head, ball head, camera support, tripod, photography accessory
- Teknolojia ya Uzalishaji
- The Aspen is constructed primarily from aluminum 6061 which is hard anodized for increased scratch and corrosion resistance. Stainless steel and bronze are also utilized for interacting threaded parts. All parts are CNC machined with either live-tooling lathes or 5-axis mills and the machining process was fine-tuned over many iterations to optimize tolerances and fit. The custom locking knob is constructed of an injected molded rubber to improve feel and ergonomics.
- Changamoto ya Ubunifu
- In order to maximize range of motion, an open framed design was chosen for the Aspen. However, the construction proved difficult to ensure proper locking force and rigidity. The locking pads have much less surface area than traditional ball heads, so a number of pad shapes and materials were tested to optimize the locking mechanism. The surface finish of the anodized ball also proved to be a factor in the locking force. Additionally, the correct tolerances of the interacting parts was difficult, as a balance between tight fit and smooth movement was needed to achieve the end result.
- Utafiti
- A wide variety of competitor references were studied for load capacity, vibration dampening, material selection, weight and mechanical operation. Various test rigs were created to acquire data in addition to disassembly and reconstruction of parts. A weight gauge was created to measure the max load of ball heads at various locations of load relative to the center of the ball. A vibration dampening and rigidity test was created using gyroscope and accelerometer devices attached to the ball heads. Using the data, our design team gained insight into the mechanisms and features that create a high-strength, rigid, low-weight tripod head. Range of motion was also evaluated in all of the tripod heads reviewed to ensure the Aspen exceeded the limits of traditional ball heads.
- Msukumo
- The Aspen design is centered around increasing range of motion to simplify the process of compositional framing for photographers who need to align their cameras quickly. The open frame construction eliminates the need to adjust the tripod legs to level the camera and makes bulky L-brackets unnecessary for switching from landscape to portrait orientations.
- Muda wa Mradi
- The project started in 2018 and finished in early 2020 with all design, prototyping and manufacturing taking place in Denver, Colorado, USA. The product officially launched in July 2020.
- Mtiririko wa Uendeshaji
- A camera is mounted on the adjustable lever clamp that is attached to the Aspen hollow ball. When adjustments are needed for compositional framing, the locking knob is released and the camera is rotated into position about the center axis of the ball and then re-locked. The friction control sets drag on the ball when moving freely for a customized experience. A panning lock can be tightened or loosened to create a secure lock or to rotate the ball head 360 degrees for panoramic photographs.
- Hataza
- Patent Pending. Application Number 29725750. David Graham Clark. 2020. USA
- Wanatimu
- Colorado Tripod Company
Imedhaminiwa
Gundua Zaidi ya Designers.org
Gundua bidhaa, huduma na fursa kutoka kwa washirika wetu wa matangazo.
Zaidi ya Kuchunguza
Miundo Inayohusiana
Chunguza miundo zaidi iliyoshinda tuzo kutoka kategoria hiyo hiyo, iliyochaguliwa kwa ubora.
