Muundo Junone Taa ya Mezani na Alan Aronica ni mshindi mashuhuri wa tuzo ya kifahari ya 2021 Tuzo ya Chuma ya A' Design Award katika Kategoria ya Mashindano ya Usanifu wa Sanaa Nzuri na Usakinishaji wa Sanaa.

ChumaSanaa Nzuri· 2021

Junone Taa ya Mezani

na Alan Aronica

Mteja: Alan Aronica

Mshindi wa Tuzo ya Chuma ya A' Design Award katika Kategoria ya Sanaa Nzuri

11,437

Mshindi wa Tuzo Aliyethibitishwa

Thibitisha Hali ya Tuzo kwa #123885

Tembelea Tovuti Tazama kwenye A' Design Award Taarifa kwa Vyombo vya Habari Beji ya Tuzo

Rangi

Muundo

Kuhusu Junone Taa ya Mezani

Junone ni taa iliyoundwa kama chanzo cha mwanga chenye kazi maalum na pia kama kazi ya sanamu ya kisanii. Umbo lake linachanganya maumbo ya asili yenye mviringo pamoja na mivutano iliyoongozwa na tasnia ya anga, hivyo kuunda uwepo wa kifani na hisia ya mwelekeo. Junone imetengenezwa tu kwa nailoni iliyochapishwa kwa teknolojia ya 3D na kuchanganywa na kioo, pamoja na chuma kilichochapishwa kwa teknolojia ya 3D na kuchanganywa na shaba. Ganda tupu hupunguza kiasi cha malighafi kinachotumika bila kudhoofisha muundo. Taa hii inabeba taa ya LED yenye wati 5 inayoweza kubadilishwa na kudhibitiwa mwangaza, na hufanya kazi kwa kutumia swichi rahisi. Junone ni mfululizo maalum wa vipande kumi vilivyopewa namba.

Utambuzi

Kuhusu Tuzo ya Chuma ya A' Design Award

Junone Taa ya Mezani ni mshindi wa Tuzo ya Chuma ya A' Design Award, utambuzi wenye heshima unaotolewa kwa miundo mizuri inayokidhi mahitaji ya kitaalamu na ya kiviwanda yanayotarajiwa kutoka kwa kazi zilizobuniwa vizuri. Washindi wa Chuma huonyesha ustadi mkubwa, utaalamu wa hali ya juu, uelewa wa kitaalamu na uwezo wa kibunifu wa waumbaji wao. Junone Taa ya Mezani inatarajiwa kuwa kazi inayothaminiwa sana, kupendwa na kuenziwa, ambayo ni ya vitendo na bunifu. Muundo huu ulioshinda Tuzo ya Chuma ya A' Design Award unajumuisha mbinu bora za tasnia na una sifa za kiufundi zenye uwezo zilizounganishwa na ujuzi na kipaji. Junone Taa ya Mezani inaheshimiwa kwa uangalifu wake na imebuniwa kutoa maboresho ya ubora wa maisha yanayosaidia kuufanya ulimwengu kuwa mahali bora zaidi.

Nyuma ya Muundo

Vifaa vya Habari

Mikopo, wanachama wa timu na maelezo ya kiufundi yaliyotolewa na mbuni.

Sifa za Kipekee: Junone is an exploration of the contrast arising from the juxtaposition of voluptuous organic shapes with sculptural tensions inspired by the aeronautical industry. Conceived to be architectural and yet suggesting a dynamic sense of directionality, Junone is made exclusively with 3D printed nylon infused with glass & 3D printed steel infused with bronze. Junone is part of a special series limited to only 10 pieces, each of which has a numbered label.
Vipimo na Ufungashaji: W:200mm x D:220mm x H:210mm;
Lighting: 5 Watt LED;
4,5m power cord (CEI 23-50 S11);
Lebo: #3dprinted, #3dprinting, #designerlighting, #functionalart, #design
Teknolojia ya Uzalishaji: Multi Jet Fusion 3D Printing using PA12 Nylon 40% Infused with Glass Beads; Binder Jetting 3D Printing using Stainless Steel 40% Infused with Bronze Matrix.
Changamoto ya Ubunifu: I believe in taking only the resources that are really needed, that is why I work exclusively with additive manufacturing. One of the challenges in the 3D modeling phase was to create a 3D printable empty shell, to use the least possible amount of material without compromising neither the structure nor the aesthetic. Another challenge was to take full advantage of the reflective properties of metal, designing the interaction of light with the object from every angle. This was achieved by forecasting the light pathways through photorealistic renders.
Utafiti: Having had previous experiences both with 3D printed nylon/glass & 3D printed steel/bronze, I had a clear idea of how the materials would behave. I started by recreating an accurate digital model of the lightbulb and power cord, then I digitally sculpted the lamp's body around them. Once the design was locked, I recreated a 3D polygonal model accounting for the different physical properties of the materials as well as the different tolerances of the manufacturing techniques. After the 3D printing process, I hand-assembled and tested the lamp extensively.
Msukumo: Just like the shift from tempera to oil painting during Renaissance empowered a new generation of painters to express their creativity in unprecedented ways, the shift from subtractive to additive manufacturing enables us today to explore shapes that could simply not be fabricated before. With Junone I aim to challenge the dogma of how a lamp should look like and educate the public on the novel possibilities that 3D printing can offer to create a new generation of luxury goods.
Muda wa Mradi: The project started in January 2021 in Milan and finished in March 2021 in Milan.
Mtiririko wa Uendeshaji: This is to all effects a functional lamp, operated through a traditional ON/OFF switch and powered through a power cord from a wall plug.
The 4.5m power cord allows to reach even far away plugs. The LED lightbulb creates a warm and welcoming light without heating, and it is both dimmable and replaceable.