Muundo Vista EY2T Kamera ya Kitambulisho cha Kibaolojia yenye Mota na Chris Dopp & Travis Baldwin ni mshindi mashuhuri wa tuzo ya kifahari ya 2015 Tuzo ya Fedha ya A' Design Award katika Kategoria ya Mashindano ya Usanifu wa Bidhaa za Usalama na Ufuatiliaji.
FedhaBidhaa za Usalama· 2015
Vista EY2T Kamera ya Kitambulisho cha Kibaolojia yenye Mota
na Chris Dopp & Travis Baldwin
Mteja: Vista Imaging and Crea Inc Design LTD
Mshindi wa Tuzo ya Fedha ya A' Design Award katika Kategoria ya Bidhaa za Usalama
Mshindi wa Tuzo Aliyethibitishwa
Thibitisha Hali ya Tuzo kwa #40052Muundo
Kuhusu Vista EY2T Kamera ya Kitambulisho cha Kibaolojia yenye Mota
Vista EY2T ni kamera ya kitambulisho cha kibaolojia yenye mota, iliyoundwa kwa ajili ya utambuzi wa mboni ya jicho na uso. Kifaa hiki huchunguza eneo la mtazamo kutafuta nyuso, kisha mota huzungusha kamera ili kuelekeza kwenye macho. Mtawanyiko mpana wa taa za LED za infrared pamoja na mfumo wa kujiongoza kiotomatiki (autofocus) huruhusu unasaji wa picha kwa umbali wa futi 3 hadi 6, hivyo hakuna haja ya kuelekeza kwa mkono. Vitambuzi tisa vya mbele vimeunganishwa nyuma ya uso mmoja mweusi, na umbo la silinda lenye ncha za mviringo huunda muundo wenye utulivu na usiotisha. Kamera hii inaweza kutumika ikiwa peke yake au kwa kutumia tegemeo la ukutani.
Utambuzi
Kuhusu Tuzo ya Fedha ya A' Design Award
Vista EY2T Kamera ya Kitambulisho cha Kibaolojia yenye Mota ni mshindi wa Tuzo ya Fedha ya A' Design Award, utambuzi wenye heshima kubwa ya ajabu unaotolewa kwa miundo ya hali ya juu kabisa, ya kupendeza na ya kuvutia. Washindi wa Fedha ni kazi zinazong'aa mno na bunifu kupita kiasi zinazoonyesha utaalamu bora, kipaji na busara ya wabunifu wao. Vista EY2T Kamera ya Kitambulisho cha Kibaolojia yenye Mota inatarajiwa kuwa kazi nzuri ya kuigwa ambayo ni ya kitaalamu kwa kiasi kikubwa na yenye ubunifu wa kina. Muundo huu ulioshinda Tuzo ya Fedha ya A' Design Award ni uvumbuzi unaojulikana sana na kupendwa, unaonufaisha na kupanua mipaka ya sanaa, sayansi, usanifu na teknolojia. Vista EY2T Kamera ya Kitambulisho cha Kibaolojia yenye Mota ni kazi inayotamaniwa mno inayochochea hamu, huleta hisia chanya na huzua mshangao na mastaajabu.
Nyuma ya Muundo
Vifaa vya Habari
Mikopo, wanachama wa timu na maelezo ya kiufundi yaliyotolewa na mbuni.
- Sifa za Kipekee
- The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
- Vipimo na Ufungashaji
- The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm. - Lebo
- Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
- Teknolojia ya Uzalishaji
- The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
- Changamoto ya Ubunifu
- The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
- Utafiti
- Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
- Msukumo
- Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
- Muda wa Mradi
- The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
- Mtiririko wa Uendeshaji
- When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture. - Wanatimu
- Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin - Haki za Picha
- Image #1: Photographer Travis Baldwin / In Office / 2015
Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015
Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015
Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015
Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015
Imedhaminiwa
Gundua Zaidi ya Designers.org
Gundua bidhaa, huduma na fursa kutoka kwa washirika wetu wa matangazo.
Zaidi ya Kuchunguza
Miundo Inayohusiana
Chunguza miundo zaidi iliyoshinda tuzo kutoka kategoria hiyo hiyo, iliyochaguliwa kwa ubora.
